Setting Up the 3Pi Classroom Kit - Part 2

Now that your mount with wiimote attached is securely attached to your data projector, it is time to connect the rest of the hardware.

Take the remote synch switch and put its red end plug into the matching red wiring socket.

You can then position the remote switch in a convenient location - you have 10m of cable so this should be easy.

Now plug the power adapter into its matching black socket. (Note: unless a customer species otherwise, the power adapter supplied will have the standard New Zealand/Australian pins. It will work on almost any international power system but you would need to source an adapter plug to fit your wall outlet. Let us know if you would like a different configuration.)

It is worth mentioning that our red power insert, that clips in where the wiimote batteries used to, has been designed and built specifically for the wiimote. It is not a rebranded rechargeable battery pack in disguise. It can handle a wide range of voltages and then puts out a steady wiimote friendly voltage and current.