Installing a data projector - Part 2

The actual installation is sometimes left to school caretakers or maintenance personal and we strongly recommend that they read the previous post before starting. To help with the practicalities of the job, the tips below may be useful.

• Shift the whiteboard to the right height for the users.
• Connect the projector to the computer that will use it.
• Position the projector as close as possible to the screen while ensuring the picture is within the screen and no wider than 1.5m.
• Use a string with a weight on the end to mark on the ceiling where the projector mount should be fitted.
• Ensure that the mount is securely attached to the ceiling (we have several easy solutions for this – email us if you need advice).
• The projector will need a power outlet to plug into. If there isn’t a ceiling outlet, you can run an extension lead to it using commonly available cable channelling (ask at an electrical store).This channelling will also be needed for the VGA cable that will connect the projector to the computer. Make sure you know where the computer will be positioned so the channelling ends at the right place!